|
DIGITAL DC STEPPER DRIVES
- PWM (Pulse Width Modulated)
switching at outputs
- Modular, compact & efficient as compared to conventional R-L drives.
- Guaranteed short circuit protection at outputs
- Available for both unipolar as well as bipolar DC Stepper Motors
- Offers 3 digital inputs and 3 digital outputs for various interface
options
- Serial interface RS 485 /RS 232 for remote operation.
- Optional high speed input for encoder-to suit close loop application.
- Various operational interfaces offered are
:
Ø
Pulse Mode : Pulse
/Direction/Enable Digital input
Ø
Analogue Mode : 0-10 V DC
/4-20mA
Ø
mP
compatible parallel
interface-required 12I./O lines
- Economical Stand alone
module with 2 digital inputs / 6 digital displays 5 keys
- AUTO POWER can provide
complete and both time and cost effective application support with reliable and
industry proven technology of the other range of products- different MMI's PC
base Control Systems, PLC's and other standard interfaces
Stepper
& Servo
PLC
WITH MMI
- Fully Programmable
for customised applications
- Reliable, industry proven
micro controller based technology
- Offers 24 digital inputs and
digital outputs
- Serial Interface RS 585 /RS
232
- LED/LCD display options
available with different key combinations
- Expandable for more no of
digital /analog inputs/outputs
- 6 digit totalizer / 4 digit
presettable counter
PRESETTABLE
COUNTERS /TIMERS
- 4 digit display / 48x96x100
& 96x96x100 size available
- Reliable, industry proven
microcontroller base technology
- Different counter
configurations
Ø
One
set point
Ø
Two set point
Ø
Totalizer
Ø
RPM indicator
- Different timer
configurations
Ø
On delay
Ø
One set point
Ø
Two set point
Ø
Cyclic
Ø
Time
totalizer
-
AUTO POWER can provide
complete and both time and cost effective application support with reliable and
industry proven technology of the other range of products- different MMI's PC
base Control Systems, PLC's and other standard interfaces
Temperature
Controllers > Economical
- Fully Programmable
PID Control Action
Ø
Proportional Band /Integral
gain /Derivative gain / Cyclic time / Blower Point
- Four digit display
- Two digital Outputs - Heat and Cool
- 90-270 V AC universal SMPS
at input
- Inherently reliable micro-controller technology
- Light Weight /Different Sizes > 48 x 96x 100 / 96 x96 x100
- Thermocouple-J/K/R/S, PT 100, 0-10Vdc /4-20mA
- Different Mode of operation > On /Off Controller
Ø
Two set point Controller
with & without Hysterisis
Temperature
Controllers
- Fully Programmable PID control Action
Ø
Proportional Band /Integral
gain / Derivative gain / Cycle time /Blower Point / Lo-Hi Alarm /Minimum-maximum
set point-Output/Software Selectable Thermocouple /Cable Length compensation
offset.
- Two Four Digit Displays
- One analog output-0-10V DC /4-20mA and
one digit output
- 90-270 V AC universal SMPS
at input
- Inherently reliable micro controller technology
- Auto /manual bumpless transfer
- Software linearisation for better measuring accuracy
- Thermocouple -J/K/R/S, PT100, 0-10Vdc /4-20mA
- Different Mode of operations
Ø
On/Off Controller
Ø
Two set point Controller
with and without Hysterisis
Six
Channel Temperature Controller
- Unbelievably compact size -96 x 96x150 & light weight < 1kg
>
- Fully Programmable PID control Action
Ø
Proportional Band /Integral
gain / Derivative gain / Cycle time /Blower Point / Lo-Hi Alarm /Minimum-maximum
set point-Output/Software Selectable Thermocouple /Cable Length compensation
offset
- Two Three Digit Display
& one single digit to display Channel
- Two digit outputs per
channel -Heat & Cool
- 90-270 V AC universal SMPS
at input
- Inherently reliable micro controller technology
- Low Temperature interlock -
relay output
- Thermocouple J/K/R/S, PT
100, 0-10 V DC /4-20mA
- Different Mode of Operations
Ø
On/Off Controller
Ø
Two set point Controller
with & without Hysterisis
|
